Ecopoxy - Tabletop and Deep Pour Epoxy
UVPoxy - 20L Kit
$399.96
Skip to product information
Ecopoxy - Tabletop and Deep Pour Epoxy
$399.96
How much epoxy do I need?
Enter your measurements in inches. We will work out the volume and the kits that cover it.
Measure the river or void, not the whole table. Use decimals: 1.5 for 1-1/2 in.
This is an estimate. Limits follow EcoPoxy's instructions; always read the directions on your kit.
EcoPoxy epoxy kits, in stock at M2 Lumber in Laurens, SC. Pick your formula and kit size above.
FlowCast (deep pour) is a slow-curing casting resin for river tables, large voids and cracks in live edge slabs, and casting. It cures slowly so a big pour does not overheat and crack. Pour it 1/2 to 1-1/2 in deep per layer, and no more than 20 liters per layer. Kits: 6L, 12L and 30L.
UVPoxy (tabletop) is a self-leveling clear coat for tabletops, bar tops and seal coats, with UV stabilizers to resist yellowing. It also fills small knot holes in one pour. Up to 1/8 in per coat over large surfaces. Kits: 1L, 2L, 4L, 8L and 20L.
Not sure how much you need? Use the epoxy calculator on this page. Larger kits cost less per liter, so size up if you have more projects coming. Mixing pails, a 5 gallon pour bucket and a V-notch spreader are also on this listing.
FlowCast vs. UVPoxy: which epoxy to use, plus mixing and pouring tips.