Ecopoxy - Tabletop and Deep Pour Epoxy
Add what you'll need for the pour
Check the extras and add everything at once. Change quantities in your cart.
How much epoxy do I need?
Enter your measurements in inches. We will work out the volume and the kits that cover it.
Measure the river or void, not the whole table. Use decimals: 1.5 for 1-1/2 in.
This is an estimate. Limits follow EcoPoxy's instructions; always read the directions on your kit.
Epoxy Estimator Pro: figure your pour from a photo
Snap your slabs laid out in the mold. We measure the epoxy area, the live edge to seal and the pours you need, then pick the FlowCast and UVPoxy kits for you. Free for VüdVerker members.
Open Epoxy Estimator Pro →EcoPoxy epoxy kits, in stock at M2 Lumber in Laurens, SC. Pick your formula and kit size above.
FlowCast (deep pour) is a slow-curing casting resin for river tables, large voids and cracks in live edge slabs, and casting. It cures slowly so a big pour does not overheat and crack. Pour it 1/2 to 1-1/2 in deep per layer, and no more than 20 liters per layer. Kits: 6L, 12L and 30L.
UVPoxy (tabletop) is a self-leveling clear coat for tabletops, bar tops and seal coats, with UV stabilizers to resist yellowing. It also fills small knot holes in one pour. Up to 1/8 in per coat over large surfaces. Kits: 1L, 2L, 4L, 8L and 20L.
Not sure how much you need? Use the epoxy calculator on this page. Larger kits cost less per liter, so size up if you have more projects coming. Mixing pails, a 5 gallon pour bucket, mixers and a V-notch spreader are in Epoxy Accessories.
FlowCast vs. UVPoxy: which epoxy to use, plus mixing and pouring tips.